Verlixia

![verlixia banner :/](https://cdn.modrinth.com/data/cached_images/7eac0f16da31430da42b5ac0fa1bf28df6465237.jpeg)

### DISCLAIMER!
Most of the Verlixia code is originally by Capt Tatsu in his [BSL Shaders](https://modrinth.com/shader/bsl-shaders). Verlixia is a “fork” of BSL Shaders v8.3 with permission by Capt Tatsu himself. Credits to Capt Tatsu! Verlixia is also currently in beta and slightly unfinished.

## Verlixia!
**Verlixia** is a shaderpack based on BSL that adds/changes:
– Color toning: Warmer colors during the day but cooler colors during night time and storms!
– Better darkness: Nights and caves are more darker for realism, including storms.
– Wet reflections: Water is now reflective by default and now after it rains, blocks will have a shiny wet reflection!
– Multi-colored block lighting: Soul torches and redstone objects have their own colored glow, but is pretty subtle!
– Heat haze: A wavy effect when you are looking at things like lava, fire, torches or in a desert, savanna or the Nether!
– Wind gust system: Waving is now randomized and can be a little wavy up to wavy based off wind gust.
– New atmospherics: The End has an endless purple aurora in the sky and way more purple toned than BSL, the Moon has a more bluish tint than BSL too.
– Darkness effect rework, including desaturtion, film grain boost and a slight chromatic aberration effect, for horror effect.

### Platforms, versions and hardware requirements
Verlixia can be ran with the Iris mod with Sodium and/or OptiFine, works best on Iris due to its modern architecture and Sodium integration. Verlixia can work also on many versions and subversions like BSL, this includes:

– 1.21.x (has been tested)
– 1.20.x
– 1.19.x
– 1.18.x
– 1.17.x
– 1.16.x
– 1.15.x
– 1.14.x
– 1.13.x
– 1.12.x
– 1.11.x
– 1.10.x
– 1.9.x
– 1.8.x

Verlixia is pretty demanding, more demanding than BSL so you will need these for your PC for **High** experiences on **1440p**:

| Tier | Recommended GPUs | Target Performance |
| :— | :— | :— |
| **Minimum** | RTX 1660 Super / RX 5600 XT / Arc A380 | 40+ FPS |
| **Recommended** | RTX 5070 Ti / RX 9070 XT | 144+ FPS |
| **Best Performance** | RTX 5090 | 240+ FPS |

| Tier | Recommended CPUs | Target Performance |
| :— | :— | :— |
| **Minimum** | Ryzen 5 3600 / i3-12100 | 30+ FPS |
| **Recommended** | Ryzen 7 7700X / i9-12700K | 144+ FPS |
| **Best Performance** | Ryzen 9 9950X3D / i9-14900KS | 240+ FPS |

However these are just estimates and may be inaccurate and depends on how powerful your CPU is. These estimates only count 1440p and High, 1080p + Medium has lower requirements and 4K + Ultra has way higher requirements. This also depends on how much RAM you have, 32 GB is recommended / give Minecraft 6GB.

### License & testing info
Verlixia is created by KaiakK, original BSL shaders by Capt Tatsu. This plugin was tested on a RTX 4060, 1440p, 16GB of RAM! First shader pack by me ever, probably the last too.

Thanks for 8,000 downloads!

velostat

This plugin provides a lightweight HTTP API that exports the real-time status of all Velocity backend servers in JSON format.
Exported fields are fully configurable via `plugins/velostat/config.yml`, allowing safe public exposure.

The game version is for all versions supported by Velocity 3.4.0-SNAPSHOT as it is added to the proxy server only. The game version must be specified and is specified, but see the [Server compatibility](https://docs.papermc.io/velocity/server-compatibility/) for details.
– – –
# Installation
1. Download the latest release of the plugin
2. Put `velostat-x.x.jar` in /plugins directory of velocity

This completes the process!
– – –
# Config reference
| Setting name | Description | Default |
|:—————————|:———————————————————————————–|:——–|
| `api.port` | The port number for the internal HTTP server to listen on. | `8080` |
| `ping.interval_seconds` | The interval (in seconds) at which the plugin pings sub-servers to collect status. | `10` |
| `export.server.name` | Whether to include the server name (defined in Velocity) in the JSON output. | `true` |
| `export.server.address` | Whether to include the server address in the JSON output. | `true` |
| `export.server.status` | Whether to include the online/offline status in the JSON output. | `true` |
| `export.server.motd` | Whether to include the server’s MOTD (Message of the Day) in the JSON output. | `true` |
| `export.server.players` | Whether to include player counts (online/max) in the JSON output. | `true` |
| `export.server.version` | Whether to include the game version name and protocol version in the JSON output. | `true` |
| `export.server.updated_at` | Whether to include the last update timestamp in the JSON output. | `true` |
– – –
# Example Json output
Accessing `http://:/status` will return data with a `Content-Type: application/json`.
### FULL data
“`json
{
“lobby”: {
“name”: “lobby”,
“address”: “127.0.0.1:25565”,
“online”: true,
“motd”: “Welcome to the Lobby!”,
“players”: {
“online”: 12,
“max”: 100
},
“version”: {
“name”: “Paper 1.21.1”,
“protocol”: 767
},
“updated_at”: 1704681000000
},
“survival”: {
“name”: “survival”,
“address”: “127.0.0.1:25566”,
“online”: false,
“motd”: null,
“players”: {
“online”: 0,
“max”: 0
},
“version”: null,
“updated_at”: 1704681000000
}
}
“`
### Configured data
“`json
{
“lobby”: {
“name”: “lobby”,
“online”: true,
“motd”: “Welcome to the Lobby!”,
“players”: {
“online”: 12,
“max”: 100
},
“updated_at”: 1704681000000
},
“survival”: {
“name”: “survival”,
“online”: false,
“motd”: null,
“players”: {
“online”: 0,
“max”: 0
},
“updated_at”: 1704681000000
}
}

“`
## Field Description

### Root Object

| Field | Type | Description |
|———–|———|——————————————–|
| `servers` | `array` | List of servers defined in `velocity.toml` |

—

### Server Object

| Field | Type | Description |
|:————:|:———:|:——————————————————————|
| `name` | `string` | Server name defined in `[servers]` section of `velocity.toml` |
| `address` | `string` | Server address (`host:port`) |
| `online` | `boolean` | Whether the server responded to a ping |
| `motd` | `string` | Server MOTD (may contain legacy color codes) |
| `players` | `object` | Player information (only present if enabled and server is online) |
| `version` | `object` | Minecraft version information |
| `updated_at` | `number` | Last update timestamp(UNIX time) |

—

### Players Object

| Field | Type | Description |
|:——–:|:——–:|———————————-|
| `online` | `number` | Current number of online players |
| `max` | `number` | Maximum player capacity |

—

### Version Object

| Field | Type | Description |
|:———-:|:——–:|————————————-|
| `name` | `string` | Version name reported by the server |
| `protocol` | `number` | Minecraft protocol version |

—

## Notes

* Fields may be **omitted** depending on `config.yml` settings.
* If a server is offline, only `name`, `address`, and `online` are guaranteed.
* This API is intended for **internal dashboards, status pages, or monitoring tools**.
# Issue and question
If the plugin does not work properly, try deleting `config.yml`.
Problems and questions feature request [here]([https://github.com/stellarcielo/velostat/issues).

Velodicord

[![Modrinth Version](https://img.shields.io/modrinth/v/FVtm4KDD?logo=modrinth&color=1bd768)![Modrinth Downloads](https://img.shields.io/modrinth/dt/FVtm4KDD?logo=modrinth&color=1bd768)![Modrinth Game Versions](https://img.shields.io/modrinth/game-versions/FVtm4KDD?logo=modrinth&color=1bd768)](https://modrinth.com/plugin/velodicord)
[![Discord](https://img.shields.io/discord/1241236305741090836?logo=discord&color=5765f2)](https://discord.gg/352Cdy8MjV)
[![Static Badge](https://img.shields.io/badge/litlink-Nekozuki0509-9594f9)](https://lit.link/nekozuki0509)

[![Static Badge](https://img.shields.io/badge/github-Fabdicord-blue?logo=github)](https://github.com/Nekozuki0509/Fabdicord)
[![Static Badge](https://img.shields.io/badge/github-V4S4J-blue?logo=github)](https://github.com/Nekozuki0509/V4S4J)

# Velodicord
## [JAPANESE/日本語](https://github.com/Nekozuki2009/Velodicord?tab=readme-ov-file#velodicord)
## Description
This is a plugin for velocity, which allows you to share chat between discord and minecraft, Japanese language version of it, start/stop velocity server notification, player move in/out/server move notification, player death notification, player progress achievement notification, player command execution notification, server move by /server name, current coordinates notification to discord by /pos, current player notification by /player (can also be done from discord). player’s progress, player’s command execution, server move by /server name, /pos notification to discord of current coordinates, /player notification of current players (from discord as well), etc.
> **Notification of player death, player progress, player command execution, /pos notification to discord of current coordinates, and [Fabdicord](https://modrinth.com/project/fabdicord) is also needed on the fabric server side**
## TODO
1. Create a discord bot
– Required permissions
– Bot
– Privileged Gateway Intents
– PRESENCE INTENT
– SERVER MEMBERS INTENT
– MESSAGE CONTENT INTENT
– OAuth2
– OAuth2 URL Generator
– SCOPES
– applications.commands
– bot
– BOT PERMISSIONS
– Administer
1. Put this plugin in the plugins folder of velocity server and restart
1. Edit plugins/Velodicord/config.json
1. let’s enjoy!
## config file
“`
{
“_bcomment_” : “discordbotのtoken”,
“BotToken” : “aaaaaa”,
“_mcomment_” : “discordのメインチャンネルID”,
“MainChannelID” : “000000”,
“_pmcomment_” : “discordのプラグインメッセージチャンネルID”,
“PMChannelID” : “000000”,
“_lcomment_” : “マイクラサーバーのログ**フォーラム**チャンネルID(オプション)”,
“LogChannelID” : “000000”,
“_ncomment_” : “discordの入退出などの通知チャンネルID(オプション)”,
“NoticeChannelID” : “000000”,
“_pocomment_” : “discordのPOSチャンネルID(オプション)”,
“PosChannelID” : “000000”,
“_cccomment_” : “discordのコマンドチャンネルID(オプション)”,
“CommandChannelID” : “000000”,
“_vcomment_” : “VOICEVOXのタイプ CPU : 1 DirectML : 2 CUDA : 3”,
“VOICEVOX-type” : “1”,
“_dcomment_” : “デフォルトの読み上げの声のID”,
“DefaultSpeakerID” : “3”,
“_crcomment_” : “管理者コマンドを実行できるロールID”,
“CommandRoleID” : “aaaaaa”
}
“`
[![ko-fi](https://ko-fi.com/img/githubbutton_sm.svg)](https://ko-fi.com/U7U213BUNP)

VelocityWelcomeX

**VelocityWelcome
Overview**

VelocityWelcome is a comprehensive Minecraft server welcome system that works across both Velocity proxy and Bukkit/Spigot servers. It provides customizable, colorful welcome messages while eliminating the default vanilla join and quit messages for a cleaner, more professional server experience.

**Features**

Custom Welcome Messages: Display personalized, randomized welcome messages when players join your network

Player Join Counter: Show players their unique join number (e.g., “#42”) to create a sense of community and history

No Vanilla Messages: Automatically suppresses the default Minecraft join/quit messages

Network-Wide Support: Works seamlessly between Velocity proxy and all connected Bukkit/Spigot servers

Fully Customizable: Change colors, message formats, and welcome text through a simple configuration

Persistent Player Data: Maintains player join rankings across server restarts

**Why Choose VelocityWelcome?**

Clean Server Experience

VelocityWelcome completely eliminates the standard Minecraft join and quit notifications that can clutter your chat, especially on busy servers. Only your custom welcome messages will be displayed, giving your server a professional and polished feel.

Enhanced First Impressions

First impressions matter. When new players join your server, they’ll be greeted with a colorful, personalized welcome message that stands out from the standard Minecraft experience. This small touch can significantly improve how players perceive your server’s quality.

Community Building

The unique join counter feature shows players their position in your server’s history (e.g., “Welcome PlayerName! (#137)”). This creates a sense of belonging and community, making players feel like they’re part of something established and significant.

Network Efficiency

VelocityWelcome is designed specifically for proxy-based server networks. It efficiently communicates between your Velocity proxy and backend servers to ensure consistent behavior and prevent duplicate welcome messages when players move between servers in your network.

Technical Excellence

VelocityWelcome is built with performance in mind:

Lightweight with minimal resource usage

Uses efficient plugin messaging channels

Thread-safe concurrent collections for player tracking

Early-priority event handling to prevent conflicts with other plugins

**Setup and Installation**

**Prerequisites**

Velocity proxy server (latest version recommended)

Bukkit/Spigot/Paper servers (latest version recommended)

Installation Steps

**Download the Plugin Files**

VelocityWelcome.jar (for Velocity proxy)

VelocityWelcomeBukkit.jar (for each Bukkit/Spigot server)

Both from here.

**Install on Velocity**

Place VelocityWelcome.jar in your Velocity plugins folder

Restart your proxy server

A default configuration will be generated

**Install on Backend Servers**

Place VelocityWelcomeBukkit.jar in the plugins folder of each backend server

Restart each server

No additional configuration needed on backend servers

**
Configuration (Optional)**

Edit the config.json file in the VelocityWelcome folder

Customize welcome messages, colors, and other options

Save changes and use /velocity reload to apply

Configuration
The plugin creates a simple JSON configuration file with the following options:

VelocitySlots

# VelocitySlots

VelocitySlots is a simple Velocity (and BungeeCord) plugin that **fakes the maximum player slots** in your server’s MOTD.

* Supports dynamic slot adjustment based on online players with an offset.
* Can also be set to a static number or an “unlimited” mode.
* Lightweight and requires **no other plugin dependencies**.

—

## Features

* **DYNAMIC mode**: Show `online players + offset` as max slots.
* **STATIC mode**: Always show a fixed maximum slot number.
* Configurable via `config.yml`.

—

## Installation

1. Place the `VelocitySlots.jar` in your `plugins/` folder.
2. Start Velocity — a default `config.yml` will be generated automatically.
3. Stop Velocity and edit `plugins/VelocitySlots/config.yml` as needed.
4. Restart Velocity to apply changes.

—

## Configuration (`config.yml`)

“`yaml
# ———————————————————-
# VelocitySlots Configuration File
# ———————————————————-
# This file allows you to control the “max slots” displayed
# in your server list (the MOTD), without affecting the real
# number of online players.
#
# You can configure static numbers and dynamic slots.
# All settings here only affect the max players shown
# to clients.
#
# Keep in mind, this is fake max slots, meaning if for
# example the max slots of your server is at 200 players,
# the limit will still work.
# ———————————————————-

# ————————
# MAX SLOTS MODE
# ————————
# Choose how the max slots should be displayed.
# Options:
# DYNAMIC -> max slots = online players + offset
# STATIC -> max slots = static-slots value
max-slots-mode: DYNAMIC

# ————————
# DYNAMIC MODE SETTINGS
# ————————
# Only used if max-slots-mode is set to DYNAMIC.
# The plugin will take the real online player count and
# add the offset. This makes the server appear fuller.
# Example: 50 players online + offset 10 => 50/60 shown
offset: 0

# ————————
# STATIC MODE SETTINGS
# ————————
# Only used if max-slots-mode is set to STATIC.
# This number will always be shown as the max slots in the
# server ping, regardless of the actual player count.
# Example: static-slots: 1 will show 20/1 if 20 are online
static-slots: 100

# ————————
# NOTES
# ————————
# 1. Only the max slots value is changed; online players
# always display the real count.
# 2. Offset is ignored in STATIC modes.
# 3. Setting max-slots-mode: DYNAMIC with offset: 0
# simply mirrors the current online count as max slots.
# 4. You can adjust these values at any time; the changes
# will take effect immediately for the next server ping.
“`

—

## Example

If you have **50 players online** and `offset: 10` in FAKE mode:

“`
MOTD: 50/60
“`

VelocityShield

# VelocityShield 🛡️

A powerful VPN detection plugin for Velocity proxy servers that helps protect your network from unwanted VPN connections.

[![License](https://img.shields.io/github/license/jackh54/velocityshield)](LICENSE)
[![Java](https://img.shields.io/badge/Java-17-orange.svg)](https://www.oracle.com/java/)
[![Velocity](https://img.shields.io/badge/Velocity-3.4.0-blue.svg)](https://www.velocitypowered.com/)

## Features ✨

– **Dual VPN Detection**: Uses both proxycheck.io and ip-api.com for reliable VPN detection
– **Smart Fallback System**: Automatically switches between services if one fails
– **Efficient Caching**: Reduces API requests with configurable cache duration
– **Whitelist System**: Easily manage trusted IPs
– **Detailed Logging**: Track VPN detection events with timestamps
– **Modern Text Formatting**: Beautiful messages using Adventure’s text components
– **Permission System**: Control access to commands and bypasses
– **Configurable**: Highly customizable through config.yml

## Installation 📥

1. Download the latest release from the [Releases](https://modrinth.com/plugin/velocityshield/versions) page
2. Place the JAR file in your Velocity server’s `plugins` directory
3. Start or restart your Velocity server
4. Configure the plugin in `plugins/velocityshield/config.yml`

## Configuration ⚙️

“`yaml
# API Configuration
proxycheck-api-key: “YOUR_PROXYCHECK_API_KEY”

# VPN Detection Settings
use-proxycheck-as-primary: true
enable-fallback-service: true
allow-join-on-api-failure: true

# Cache Settings
enable-cache: true
cache-duration: 10
cache-time-unit: “SECONDS” # Options: SECONDS, MINUTES, HOURS, DAYS

# Debug Settings
enable-debug: false
“`

## Commands 🎮

| Command | Description | Permission |
|———|————-|————|
| `/velocityshield` or `/vshield` | Reload the plugin configuration | `velocityshield.reload` |
| `/vshieldwhitelist` or `/vshieldwl` | Manage whitelisted IPs | `velocityshield.whitelist` |

### Whitelist Commands
– `/vshieldwhitelist add ` – Add an IP to the whitelist
– `/vshieldwhitelist remove ` – Remove an IP from the whitelist

## Permissions 🔑

| Permission | Description |
|————|————-|
| `velocityshield.reload` | Allows reloading the plugin configuration |
| `velocityshield.whitelist` | Allows managing the IP whitelist |
| `velocityshield.bypass` | Allows bypassing VPN detection |

## API Integration 🤝

VelocityShield uses two VPN detection services:

1. **proxycheck.io** (Primary)
– Requires API key
– More accurate detection
– Higher rate limits with API key

2. **ip-api.com** (Fallback)
– Free to use
– No API key required
– Lower rate limits

## Performance Optimization 🚀

– **Caching**: Reduces API requests by caching results
– **Rate Limiting**: Prevents API service overload
– **Async Processing**: Non-blocking VPN checks
– **Efficient Cleanup**: Automatic cache maintenance

## Support 💬

– Create an issue for bug reports or feature requests
– Join our [Discord server](https://discord.gg/CzJvE4G5cU) for community support

## Credits

– [Velocity](https://www.velocitypowered.com/) – The proxy server
– [proxycheck.io](https://proxycheck.io/) – Primary VPN detection service
– [ip-api.com](https://ip-api.com/) – Fallback VPN detection service
– [Adventure](https://docs.advntr.dev/) – Text formatting library

—

Made with ❤️ by [PandaDevv](https://github.com/jackh54)

*This plugin uses [bStats](https://bstats.org/plugin/velocity/VelocityShield/25843)*

VelocityResourcepacks

###### ![https://i.imgur.com/O6LAUDf.png](https://i.imgur.com/O6LAUDf.png) Made in Germany with love (and [beer](https://s.moep.tv/beer))

######

![Velocity Resourcepacks Logo](https://i.phoenix616.dev/hqLoZwBh.png)

_Did you ever want to set one Server Resource Pack for your whole Velocity network? Or set a different pack for a couple of your servers behind your Velocity proxy and got annoyed by Minecraft re-downloading the same pack while switching servers? Then you came to the right place!_

This plugin lets you set one Server Resource Pack for you whole Velocity without the need to set them on your lobby server which would result in the client re-downloading the pack even when it already had it enabled!

It also has the ability to set the pack for each server individually and it even detects if the server behind the Velocity has send a pack itself and resets the pack to the global or server’s pack if the player switches to another server!

You can use my [Bungee Resourcepacks](https://modrinth.com/plugin/bungeeresourcepacks) plugin if you use the BungeeCord proxy and [World Resourcepacks](https://modrinth.com/plugin/worldresourcepacks) if you are looking for a Spigot/Paper version. It lets you set the pack per world and is compatible with this one.

**Please check if there are newer [development builds](https://ci.minebench.de/job/resourcepacksplugins/) before reporting issues!**

> Please note that the Vanilla Minecraft client only applies server resource packs that are smaller than **250MiB**! (50MiB before 1.15, 100MiB before in 1.18)
>
> Also certain new **SSL certificates** for URLs (like Let’s Encrypt) do not work with the old Java version shipped with Minecraft (Java 1.8.0_51, [a bug report](https://bugs.mojang.com/browse/mc-143768) regarding that has been filed with Mojang) so you’ll have to either use a different certificate or a non encrypted download (not recommended!)

**Note:** This plugin only works on clients with versions above 1.8!

### **Features**

* Set different server resourcepacks per server or whole Velocity network
* Multiple pack support (on 1.20.3+)
* Sending the pack before the player joins the server (on 1.20.3+)
* Match server names with regex!
* Commands to configure the plugin ingame
* Language system with messages depending on the locale of the client
* Simplified compoment/json message formatting syntax ([MineDown](https://wiki.phoenix616.dev/library:minedown:syntax))
* Configurable delay before sending the pack to a player
* Remembers which pack a user has currently applied and doesn’t resend on server switch (broken on 1.20.2, 1.20.3+ has that fixed)
* Let the user set the pack himself. The pack can be re-applied on each login and will be used for resets on servers that don’t have the pack
* Inform the user which pack the server send them if it was done automatically
* [ResourcePackSendEvent](https://docs.phoenix616.dev/resourcepacksplugins/de/themoep/resourcepacksplugin/velocity/events/resourcepacksendevent.html) and [ResourcePackSelectEvent](https://docs.phoenix616.dev/resourcepacksplugins/de/themoep/resourcepacksplugin/velocity/events/resourcepackselectevent.html) for developers to react on the sending or selecting of a pack in their own plugins
* Send the correct pack format depending on the client’s version with pack-variants either via the version, protocol number or pack format id.
* Automatically generates the sha1 hashes!
* Compatible with [AuthMe Reloaded](https://www.spigotmc.org/resources/authme-reloaded.6269/), AuthMeVelocity, [OpenLogin](https://www.spigotmc.org/resources/openlogin-1-7x-1-19x.57272/), NLogin, [LibrePremium](https://www.spigotmc.org/resources/librepremium-proxy-authorization-plugin-automatic-login-2fa.101040/), JPremium.
Do you need it to be compatible with more plugins? [Contact me](https://github.com/phoenix616/resourcepacksplugins/issues/new)!

### **Commands**
To execute every /vrp command you need the `velocityresourcepacks.command` permission!

**/vrp reload [resend]** – `velocityresourcepacks.command.reload` – Reloads the config file; resends the packs to every online player if the 2nd argument is “resend”

**/vrp version** – `velocityresourcepacks.command.version` – Shows the version of this plugin

**/vrp generatehashes** – `velocityresourcepacks.command.generatehashes` – Manually generate the resource pack hashes

**/vrp addpack ** – `velocityresourcepacks.command.addpack` – Add a new pack

**/vrp pack ** – `velocityresourcepacks.command.pack` – View and edit an existing pack

**/vrp listassignments** – `velocityresourcepacks.command.listassignments` – View all server assignments

**/vrp deleteassignment ** – `velocityresourcepacks.command.deleteassignment` – Delete a server assignment

**/vrp assignment ** – `velocityresourcepacks.command.assignment` – View and edit a server assignment

**/vrp globalassignment** – `velocityresourcepacks.command.globalassignment` – View and edit the global assignment

**/resetpack [] []** – `velocityresourcepacks.command.resetpack` – Reset the pack (of a player) to the empty one or the stored pack. (Like what would happen if you joined a server without any pack) If is set to false the stored pack of the player is reset too.

To execute every /usepack command you need the `velocityresourcepacks.command.usepack` permission!

To execute it for other players you need `velocityresourcepacks.command.usepack.others`!

To have access to a specific pack a player needs the `velocityresourcepacks.pack.` permission or the one defined for the pack in it’s config section!

**/usepack** – List all packs available to you

**/usepack []** – Send a specific pack to yourself or another player

### **Config**

The config.yml allows you to configure everything you can do set up via the commands and a lot more, take a look at the commands in the [file on GitHub](https://github.com/phoenix616/resourcepacksplugins/blob/master/velocity/src/main/resources/velocity-config.yml) for an explanation on all options! (Some might only be available on the [latest development builds](https://ci.minebench.de/job/ResourcepacksPlugins/)!

### **About the client freeze**
> **This should no longer be an issue starting with 1.20.3!**

When a server resource pack is send to a client it will shortly freeze after the download is complete. (Same as manually applying a local pack) This happens because the client has to reload all resources, check which resources overlap and do some other calculation and manipulation with them. (Like stitching all the textures together to a single image like they were in the first texture pack format) It’s not a download issue as the client will locally cache the pack files and not re-download them if their hash didn’t change.

How long this takes generally depends on the PC’s performance and the size of the textures (HD packs take longer) that are used in all resource packs that the player has applied. (So even if the server resource pack doesn’t contain any HD textures or textures at all the client will still completely reload all locally applied resource packs) This is something that has to be fixed in the client by Mojang for example by only reloading resources that changed.

**1.14, 1.15 and 1.16 have some major improvements there and 1.20.3 basically fixed it all so suggest players to use these if they have issues with your server resourcepack!**

### **Dev-Resources**
The source is available on [GitHub](https://github.com/phoenix616/resourcepacksplugins) and licensed under the [GPLv3](https://github.com/phoenix616/resourcepacksplugins/blob/master/license).
Development builds can be found on the Minebench.de [Jenkins](http://ci.minebench.de/job/resourcepacksplugins/).
There are also some [Javadocs](http://docs.phoenix616.dev/resourcepacksplugins/) if you intend to develop plugins based on mine.

### **Support**
You can receive support in the [resource discussion thread on PaperMC](https://forums.papermc.io/threads/velocityresourcepacks.30/), the [GitHub issue tracker](https://github.com/phoenix616/resourcepacksplugins/issues), [my IRC channel](https://irc.phoenix616.dev/), or [my Discord](https://phoenix616.dev/discord).

#####

*This resource is distributed without any warranty or liability by the author. Read more about it [here](https://github.com/Phoenix616/ResourcepacksPlugins/blob/master/LICENSE#L589-L610)*

VelocityReport

[![image](https://i.imgur.com/46IouRo.png)](https://github.com/Syrent/VelocityReport)
[![image](https://i.imgur.com/J9wNr1T.png)](https://modrinth.com/plugin/velocityvanish)
[![image](https://i.imgur.com/I5r8RZg.png)](https://modrinth.com/plugin/enhancedvelocity)
[![image](https://i.imgur.com/B4jL8Hr.png)](https://discord.gg/SW3NeujBmh)

## Easy to install
There isn’t that many usable Report plugin out there and there is an almost zero usable report plugin for Velocity networks. VelocityReport also supports multiple platforms like Spigot, Paper, Purpur, etc… as a back-end server.
## Feature packed
Everything you want and need from a report plugin for your Minecraft server is right here! There are a lot of features like BookGUI, different report stages, rewards, RGB/gradient/component messages, custom report reasons, and much more…
Also, there is a bunch of API methods and events that you can use to create addons for the plugin and add new features.
## Quality support
You’re able to [join our Discord](https://discord.gg/VZk2XU3kFg) and get help very quickly, up to instantly.
## Up to date
The plugin is not abandoned. It is constantly getting updated to fix reported bugs and get new optimizations that can help it run as smoothly as possible, whilst still doing what you want it to do.
## Multiple database types
You can use MySQL and SQLite as your database type.
## High performance
Unlike other plugins where “high performance” often means your CPU usage will be high, VelocityReport has an async database update that means there is no lag spike and high thread loads on your server.

VelocityPteroPower

# VelocityPteroPower
![Static Badge](https://img.shields.io/badge/Velocity-green)
[![forthebadge](https://forthebadge.com/images/badges/works-on-my-machine.svg)](https://forthebadge.com)


buymeacoffee





Please join the Discord if you have questions or for support!

**Manage your game servers with ease!** VelocityPteroPower connects your Velocity proxy to Pterodactyl, Pelican Panel, or Mc Server Soft, allowing for dynamic starting and stopping of your game servers.

**For detailed information on configuration, commands, and permissions, please visit our [Docs Page](https://docs.pluginz.dev/).**

## Key Features
– **Multi-Panel Support**: Works with Pterodactyl, Pelican Panel, and Mc Server Soft.
– **Dynamic Server Management**:
– Automatically start servers when a player attempts to connect.
– Automatically stop idle servers after a configurable timeout.
– Manual control via commands (`/ptero start`, `/ptero stop`, `/ptero restart`).
– **Whitelist Integration**:
– Fetch and enforce server whitelists from Pterodactyl/Pelican panels.
– Reload whitelists on the fly with `/ptero whitelistReload`.
– **Efficient & Safe**:
– Respects panel API rate limits (Pterodactyl/Pelican/Mc Server Soft).
– Handles forced host connections, redirecting players to a limbo server.
– **Update Notifications**: Stay informed about new plugin versions.
– **Configurable**:
– Fine-tune server startup/shutdown behavior.
– Customize logging levels.
– Per-server settings for timeouts, join delays, and whitelist enforcement.

## Commands
– `/ptero start `
– `/ptero stop `
– `/ptero restart `
– `/ptero reload`
– `/ptero whitelistReload`
– `/ptero stopIdle`
– `/ptero forcestopall`

## Permissions
– `ptero.start`
– `ptero.stop`
– `ptero.restart`
– `ptero.whitelistReload`
– `ptero.reload`
– `ptero.stopIdle`
– `ptero.forcestopall`
– `ptero.bypass` (to bypass VPP whitelist checks if enabled)

## Installation
1. Download the latest `.jar` file from [Modrinth](https://modrinth.com/plugin/velocitypteropower).
2. Place the `.jar` file into your Velocity server’s `plugins` folder.
3. Restart your Velocity server.
4. Configure the plugin by editing `config.yml` in the `plugins/VelocityPteroPower` folder. **See the [Docs Page](https://docs.pluginz.dev/) for detailed configuration instructions.**

## Support
For issues, suggestions, or help, please [open an issue on GitHub](https://github.com/TubYoub/VelocityPteroPower/issues/new) or join our [Discord Server](https://discord.pluginz.dev).

## Contributing
Interested in contributing? Join our [Discord](https://discord.pluginz.dev) to discuss your ideas or submit a pull request!

## License
This project is licensed under the [MIT License]([https://github.com/Tubs-Pluginz/VelocityPteroPower/blob/dev/LICENSE).

[![forthebadge](https://forthebadge.com/images/badges/powered-by-black-magic.svg)](https://forthebadge.com)

VelocityPlayerListQuery

# VelocityPlayerListQuery

A Velocity plugin that shows current players in the server list.

Inspired by .

## Configuration options

| option | default | description |
| ————————– | ————- | —————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————– |
| `playerListMode` | `”REPLACE”` | Configure how players are shown in the player list.

|
| `serverListEntryFormat` | `”%1$s”` | Configure how players are shown in the server list.

|
| `maxListEntries` | `16` | Configure how many players are shown in the server list. `<= 0` for unlimited (for backwards compatibility). | | `replaceOnlinePlayerCount` | `false` | Should the online player count be replaced with the number of players currently connected to Velocity? Useful when using `ping-passthrough = "all"`. | | `replaceMaxPlayerCount` | `false` | Should the maximum player count be replaced with the Velocity configured amount? Useful when using `ping-passthrough = "all"`. | | `fillMissingVersionInfo` | `false` | Should the version information be replaced with what is set in `versionProtocol` and `versionName`, when no version is detected? Useful when the backend server/s is/are unavailable or still starting. |
| `replaceVersionInfo` | `false` | Should the version information always be replaced with what is set in `versionProtocol` and `versionName`? Extends `fillMissingVersionInfo`. Useful when using `ping-passthrough = “all”`. |
| `versionProtocol` | `4` (= 1.7.2) | The protocol number to be set. You can find all available protocol versions at . Used by `fillMissingVersionInfo` and `replaceVersionInfo`. |
| `versionName` | `”Velocity”` | The version name to be set. Used by `fillMissingVersionInfo` and `replaceVersionInfo`. |