XP-like HUD

# **About XP-like HUD**

**XP-like HUD** (or wixewsky’s XP-like HUD) will change in-game HUD (health, food, armor, etc) to use colored experience-like bars, being very vanilla-friendly.


Originally I made this HUD for Better than Adventure! and published it on Planet Minecraft, but came up porting this to vanilla Minecraft with some improvements and publishing here, on Modrinth.

You can download XP-like HUD for BTA! [here](https://modrinth.com/resourcepack/xp-like-hud-for-bta!)!

## Mod Support
This Resource Pack supports 182 mods in total! ≈143 with custom assets and ≈39 tested out*. Currently supported mods:

| * — _mods that already work but were tested for some issues_.

**This count will grow with updates.** If you want to see your favorite mod in this list, DM me on Discord or Telegram (read Contact). Some mods not included in this list can work without issues, but it is not guaranteed. Forks of included mods must work fine, if textures and texture structuring was not affected by the fork. I recommend use mod versions that were released before XP-like HUD’s update since some mods may add more content in the HUD or change it with updates.

Due to the rounded corners, some mods, like hunger removal or HUD flipping mods, may cause some visual problems. You can download sharp or circular corner variant to fix these compatibility issues. Just download additional (supplementary) file by selecting it on download page, since it is not the main version of this Resource Pack. Also you can find an addon for flipped armor bar inside .zip file.

## Variants and Addons
This Resource Pack comes in three variants:

– **Rounded**: The main variant, rounds only the left or right side of bars, depending on its position.
– **Sharp**: No corners of the bars are rounded.
– **Circular**: Every corner of the bars is rounded.

This Resource Pack includes four optional addons inside .zip file:

– **Pre-hunger Addon**. Flips armor and oxygen bars for better experience with hunger removal mods.
– **Numbered Hotbar Addon**. Adds numbers on hotbar for better accessibility.
– **Alpha and Beta Addon**. Extends XP-like HUD’s support to every single Minecraft version.
– **Armor Chroma Addon**. Adds full compatibility for Armor Chroma and Armor Chroma for Fabric.

Due to some limitations with assets count, some XP-like HUD versions on Minecraft 1.20.3 and below can crash your game because it has too much folders inside assets. Delete useless mods, update your game, use version with less content, or use older Resource Pack versions, there is nothing I can do (except stop adding more and more mod support) (Minecraft 1.20.X and below worked fine on my end while I was testing mods ever since I added “CRASH FIX” and “Vanilla” versions inside main .zip btw).

You can leave a comment on [Planet Minecraft](https://www.planetminecraft.com/texture-pack/xp-like-hud/)!

## Contact

If you want contact me, ask a question, help with development, suggest a mod to support, or report a bug, DM me on Discord **[@wixewsky](https://discord.com/users/372017357222313987)** or Telegram **[@wixewsky](https://t.me/wixewsky)**.

WorldChatter


# Security Features

### Anti-Swear
This helps to prevent any sensitive or inappropriate words from your chat to help keep it clean.
It has the ability to customize words (BlackList / WhiteList).

### Anti-Repeat
This prevents players from repeating the same words or letters over and over again.

### Anti-ADs
It will block any type of IPs or URLs from the player.

### Anti-Caps
This helps to prevent the player from sending large uppercased messages in the chat!

# Configurations!

### Detection Messages!
If anyone triggers one of the security settings, you will be alerted, and they will be alerted as well.

“`yaml
DetectedMessage: “&c%player_name%’s message got detected by the following flags &e[%flags%] n———-> &6%message%” # Change how the detection message is sent
DetectedPlayerMessage: “&cYou have been detected by the following flags &e[%flags%]” # Changes how the message is sent to the player (set it to “” if you don’t want to send it)
“`

### Switch Messages (For Proxies)
This will notify everyone in the server or the previous and current server when a player switches from one server to another!

“`yaml
# This switch message is only available for both BungeeCord & Velocity
SwitchSettings:
enabled: true
global: true # false is just the current server & previous server / true all the servers
premessage: “&a%player_name% &ehas switched from &6%previous_server% &eto &f%current_server%”
comessage: “&a%player_name% &ehas arrived from &6%previous_server%”
“`

### Others

“`yaml
SpamMessage: “&cYour message is blocked by the &eAnti-Spamn&7Remaining time: %duration% seconds” # Changes how the anti-spam message is sent (set it to “” if you don’t want to send it)
ChatClearMessage: “&eThe Chat has been cleared by &a%sender%” # Changes how the cleared chat message gets sent
NoPermissionMessage: “&eYou’re not allowed to use this command!”
“`

# Utilities Features!

### Aliases
This feature enhances WorldChatter’s placeholders by allowing customization of player and place names using two new placeholders: `{player_name}` and `{player_place}`.

“`yaml
aliases:
enabled: true
place:
world: “&aOverworld&r”
player:
OmarOmar93: “OmarOmar93 &o&eTest Omar Yes”
“`

### Chat Locking
This allows staff or console to lock or unlock the chat using `wc lock`!

“`yaml
ChatLockMessage:
enabled: true
public: true # TRUE | Shows the message to everyone or FALSE | just the sender
locked: “&eThe Chat is now &cLOCKED &eby &a%sender%”
unlocked: “&eThe Chat is now &aUNLOCKED &eby &a%sender%”
currently: “&eThe Chat is Currently &clocked”
“`

### Clear Chat!
Clear the chat with `wc clear`!

### Custom Join and Quit Messages!
Customize join and quit messages with special permissions for certain players.

“`yaml
Join:
enabled: true
level: 1 # 1 is just current place / 2 the whole server
place: “world” # place to send the message
message: “&a%player_name% &fhas joined the game!”
permmode: true # Checks to use the permissions mode to send messages / disabled will use default message
permissions:
“admin”:
permissions: [ “worldchatter.control”, “*” ]
message: “&a%player_name% &fhas joined the gamen&e[Teleport to %player_name%]”

Quit:
enabled: true
level: 1 # 1 is just current place / 2 the whole server
place: “world” # place to send the message – type %place% to make it the last player’s place
message: “&a%player_name% &fhas left the game!”
permmode: false # Checks to use the permissions below to show a different message or no!
permissions:
“admin”:
permissions: [ “worldchatter.control”, “*” ]
message: “&a%player_name% &fhas left the game &8You have nothing to do to that player :P”
“`

### Notifications
Customize notification sounds for detections.

“`yaml
notification:
enabled: true
staff: # notification detection for staff
sound: “BLOCK_NOTE_BLOCK_PLING” # the sound to play as the notification you can find it here by https://helpch.at/docs/SERVER_VERSION_GOES_HERE/index.html?org/bukkit/Sound.html
volume: 1 # volume of the sound
pitch: 1 # pitch of the sound
player: # notification detection to the player
sound: “BLOCK_NOTE_BLOCK_PLING”
volume: 1
pitch: 1
“`

### Channels
Introducing the new **Channels** Feature!
Add Places or Players **or both if you would like!** Into each other and priortize them from top to bottom according to the importance of each channel!
“`yml
GlobalSending: true
channels:
admin:
players:
– “OmarOmar93”
– “HoneySalted”
– “Notch”
places:
– “World”
– “Lobby”
main:
places:
– “world”
– “world_nether”
– “world_the_end”
“`

### Debug Mode – (Implemented in Channels only Currently)
The New Debug mode is what prints out more information about WorldChatter! like, Warnings, Errors and infos for each action happening inside the plugin!

“`yml
debug:
enabled: true
info: “&7[&9WorldChatter Debugger &r| Info&7]&r ”
warning: “&7[&9WorldChatter Debugger &r| &eWarning&7]&e ”
error: “&7[&9WorldChatter Debugger &r| &4Error&7]&4 ”
“`


# WorldChatterAPI
Learn more about the API and its capabilities by [Clicking here!](https://github.com/OmarOmar93/WorldChatterAddonChecker)

# Donate!
If you’d like to support the development of WorldChatter and other projects, consider donating!
[Buy me a Coffee!](https://www.paypal.com/paypalme/omaomar93)

# Other Projects!
[WorldCaster](https://modrinth.com/plugin/worldcaster)
Standalone Broadcast Add-on

# Supported Plugins!
– PlaceholderAPI
– Multiverse-Core
– ItemsAdder (With PlaceholderAPI)
– Luckperms
– And other plug-ins that have PlaceholderAPI’s placeholder!

# Massive thank you to:
– **Abdelaziz189356** – For the help with 2.0, 2.1, and 3.0 being possible, 3.0 Tester!
– **yousife_7aloly** – The tester for 2.0!
– **FastEverlast** – The Tester for 2.4!
– **Fabrizio Santana, 4zy** – 3.0 Testers

There are lots of additional features to explore!
Thank you for taking the time to read this and use the plugin!

Vader’s Catty Programmer Art ‘Cat’ Music Disc Pack

UniversalPluginUpdater

[简体中文](https://github.com/DreamVoid/UniversalPluginUpdater/blob/main/README.md) | English

—

## Introduction
UniversalPluginUpdater (UPU) is a Minecraft server plugin that allows you to quickly update existing server plugins, while also providing APIs to help developers easily implement automatic update functionality for their plugins.

The development of UniversalPluginUpdater was inspired by [APT](https://wiki.debian.org/zh_CN/Apt).

## Documents and tutorials

For first-time UPU users, reading the [UPU Help Manual](https://docs.upu.dreamvoid.me/en/) can help them get started quickly. Many questions can be answered by consulting the documentation, which also includes how UPU checks for updates to other plugins.

## Download
* Stable version
* [Modrinth](https://modrinth.com/plugin/upu/versions)
* [Hangar](https://hangar.papermc.io/DreamVoid/UniversalPluginUpdater/versions)
* [GitHub Releases](https://github.com/DreamVoid/UniversalPluginUpdater/releases)

## Commands

This is just a list of some commonly used commands. For a complete list of commands, please refer to the [documentation](https://docs.upu.dreamvoid.me/en/core/commands).

| Command | Description |
| — | — |
| /universalpluginupdater (/upu) | UniversalPluginUpdater main command |
| /upu update | update list of available plugins. |
| /upu list | list all available plugins |
| /upu download | download existing plugins’ newer version by downloading. |
| /upu upgrade | upgrade existing plugins by downloading/installing newer version. |
| /upu repo | configuration file repository sub-command |

## License

[GNU General Public License v3.0](https://github.com/DreamVoid/UniversalPluginUpdater/blob/main/LICENSE)

—

[DreamVoid](https://github.com/DreamVoid), Made with ❤.

unsup

***Un**a’s **S**imple **Up**dater*

unsup is a somewhat minimal implementation of a generic working directory
syncer in Java. It supports running as a Java agent, to piggy-back off of the
launch of another program.

***It is particularly good at syncing small private modpacks or one-offs in small groups, where a full public distribution (e.g. on Modrinth!) is overkill or undesirable.*** It is capable of downloading mods from their original sources, wherever that may be… as long as it speaks HTTP(S).

An [unsup.ini](https://git.sleeping.town/unascribed/unsup/wiki/Config-format)
must be placed in the working directory for unsup to know what to do, or a `-Dunsup.bootstrapUrl=` JVM argument specifying where to find such a file.

The updater works hard to ensure the working directory is never left in an
inconsistent state. Short of a sudden power loss in the middle of applying
changes (an incredibly short time window), an unsup update cannot result in
an inconsistent or corrupted working directory.

It does hash-based consistency validation (with your choice of function, SHA-256 recommended) on all downloads and on files before overwriting
them, warning the user if they’ve changed something that has been updated. It
additionally supports signing manifests using OpenBSD Signify for additional
security.

unsup’s unique simplified design means it is compatible with **all launchers**,
from the vanilla launcher to MultiMC. Just add `-javaagent:unsup.jar` to the
JVM arguments, and place `unsup.jar` and `unsup.ini` in the .minecraft
directory.

In Prism Launcher, you can utilize unsup as a “component” by importing the
`com.unascribed.unsup.json` from the latest release on Forgejo. (I can’t upload JSON files to Modrinth). This will allow Prism
Launcher to download and manage unsup. (MultiMC does not support Java agent
components, despite requests.)

It also has a built-in concept of *environments* and *flavors*, allowing it to
be used to manage server installs rather than just clients, and allowing users
to pick between multiple mutually incompatible mod sets with a feature-packed interface unlike any other updater tool.

unsup is also capable of updating MultiMC’s “components”, including
unsup itself if it is added as one. This means you can update mod loaders or
Minecraft itself.

## Creating Packs
You can either point unsup at a [Packwiz](https://packwiz.infra.link/) pack.toml (recommended),
or write a native unsup manifest by hand. See [the wiki](https://git.sleeping.town/unascribed/unsup/wiki/Manifest-format) for info on the
native manifest format. The Creator GUI is on hold, as Packwiz has become a
de-facto standard for Minecraft modpacks.

## Stability
unsup has been used for modpacks on versions from b1.7.3 to 1.21.5, both client and server,
and is known to work with Forge (both legacy and modern), Fabric, Quilt, and NeoForge. It
has successfully powered many modpacks, from [small](https://git.sleeping.town/Rewind/Upsilon)
to [large](https://github.com/ModFest/bc23-pack). Native manifest and Packwiz manifest
support are both quite stable, and have been used extensively.

Signing support is still somewhat experimental, and has not been deployed by anyone at
large scale. That someone could be you — please let me know if it works well!

## GUI
unsup has a minimal and elegant GUI that works everywhere (yes, including
macOS) and can have all of its colors customized to make it fit in with your
branding. It ships with a dark theme with minty accents. Check out the gallery tab!

## License
unsup is released under the LGPLv3.

Unsanded

An 8px font with wide vertical strokes inspired by [Chicago](https://en.wikipedia.org/wiki/Chicago_(typeface)) and [Craft Sans](https://www.curseforge.com/minecraft/texture-packs/craft-sans-font).

Has partial support for accented characters.

## Questions I Predict You’ll Ask
#### Sphinx of black quartz?
Somewhat uncommon pangram. More flavorful than “quick brown fox”.
#### Handgloves?
Semi-common typography test word. It’s short and contains most of the distinctive shapes in a Latin font.
#### Unsanded?
“Una Sans” but not.

## Testimonials
> man this font is chungy

— Kat

> *patiently waits for Unsanded to be on Modrinth*

— Cynthia

TubeStuff

This is a smallish mod that adds some useful blocks. The name TubeStuff is no longer temporary 😛

The mod doesn’t require RedPower or BuildCraft, but it’s much more useful with them. Also, there’s no recipe for the buffer if you have neither of them.

## Buffer


This block allows you to transfer items between pipes and tubes easily. It also combines stacks of items together to reduce lag.

You can fill it with items with pipes or tubes, or even manually, just like a chest.

If you put a wooden pipe, gold pipe, or basic logistics pipe next to the buffer, it will output one stack of items into the pipe every few seconds (depending on the number of empty slots – 5 seconds when empty, 0.5 seconds when full).

If you put a filter next to it, with the input side facing the buffer, it will output a redstone signal to pulse the filter at the same rate it sends items into pipes.

## Automatic Crafting Table MkII


When you right click this you will see four main area. At the top, the input (9×5). At the bottom, your inventory. At the left, a 3×3 recipe area, and a single slot at the right which is the output. Here’s how to use it:

* Set the recipe in the recipe area. Nothing will appear in the output slot, that’s normal.
* Put items into the input area by connecting tubes (or pipes) to any side. Regulators may be useful here. Each side (and the bottom) has its own row of the input area.
* Place a filter or transposer above the crafting table facing down. Apply a redstone signal to this to extract the crafted item. Another will be crafted almost instantly, if the ingredients are available.
* If the recipe produces a container item, such as buckets (when water buckets are used in the recipe), they will go to the last, red-shaded row of the input area. They can be extracted from the bottom. Note that if this is full, container items will be destroyed!

New feature not shown in the above screenshot: There is a button that toggles between 1 and 64. When it’s set to 1 (the default), no items will be crafted unless the output slot is empty. When it’s set to 64, items will be crafted until the output slot is full.

They can also be rotated with a RP2 screwdriver, Buildcraft-compatible wrench (including Crescent Hammers and OmniWrenches), IC2 wrench or stone hoe.

The “C” button (not shown in the screenshot) clears the recipe.

The “OD” button (not shown in the screenshot) is for ore-dictionary support. After entering a recipe that uses the ore dictionary – for example, 9 copper ingots – click the OD button, and the ingots will start flashing between all the available types of copper ingots. In this mode you can make copper blocks from any 9 copper ingots, even if they aren’t all of the same type. If you edit the recipe it will stop flashing.

If you have NEI, you can click the “?” button next to a recipe while the ACT2 GUI is open to select that recipe.

## Black Hole Chest

It’s a chest that holds infinite items. Simple, really.

Note that you can’t navigate to pages that don’t exist. In particular, you can’t go to a new blank page unless the previous page is full. Also, when it unloads, it will compact its contents so there are no empty slots until the end.

Disabled by default due to potential OPness – see the config to enable. Even if not enabled in the config, it can be spawned by /give, creative mode, TMI or NEI.

If these chests lag too much in fancy mode, you can force them to use the fast mode graphics in the client’s config (tubestuff.enableBHCAnim=false). You can also disable the black particles (tubestuff.enableBHCParticles=false). (Note: If you get lots of fast-moving white/grey particles, that’s a graphical glitch where they aren’t clipped to the inside of the chest; see below)

## Incinerator

Connects to pipes or tubes, and permanently destroys any items that enter it – like a lava pit, but easier to use and with no risk of spontaneous combustion.

## Duplicator

This acts like a chest that always has a certain item in it. You can pull an infinite amount of this item out of the chest with wooden pipes or transposers/filters/etc, a certain number at a time.

There is no way to legitimately get this block, and only ops can place it in SMP, for obvious reasons. Intended for things like admin-built dungeons where you want to never run out of reward items.

Right click to open the GUI (again, you must be an op except in singleplayer) and put in the item you want to spawn. The number of items in the GUI is the maximum number of items that will be spawned at a time (eg with one pulse of a filter). Remember wooden pipes and transposers will still only spawn one item at a time.

## Retrievulator

This block is the “automated retriever robot” that BrickedKeyboard suggested.
World texture is temporary. Any texture pack makers want to give me a better one? I really have no idea what this machine should look like…

The side with the bigger hole is the input. It should be touching the output side of a retriever from RedPower. If it’s touching any other block, or nothing, it won’t do anything.
The side with the smaller hole is the output. It should be touching any inventory, such as a chest or ACT2.

You can use a filter instead of a retriever, which usually isn’t very useful.

Make sure your retriever is in “non-slider” mode!

The inventory has three areas – the “R” (retriever) area, the “T” (target) area, and that single lonely slot on the right that you won’t need to touch (items go here temporarily on their way to the output inventory).
* The T area should contain the items you want to keep in the output inventory. In this example, it will be kept filled with 63 grass blocks and 63 smoothstone.
* The R area should contain at least one of each item in the T grid, and should match its layout. If that last sentence was confusing, the picture should show what I mean.
The retrievulator will move items between the R grid and the retriever, and apply redstone pulses to the retreiver, to keep the inventory stocked with the specified items. If the inventory already contains the correct items, it will spawn a “retriever jammer”, which has no other uses, and place it the retriever to stop it from accepting any more items.

Walking over a retriever jammer will destroy it instead of picking it up.

Retrievulators can be rotated with either RedPower screwdriver. As of 51.0.0, they can also be rotated with a Buildcraft wrench, IC2 wrench or stone hoe. As of 52.2.0, any BC-compatible wrench will also work, such as TE crescent hammers and OmniWrenches.

The retrievulator will emit pulses more slowly if it hasn’t successfully retrieved any items in a while. The minimum speed is 20 seconds per pulse. (new in 49.3.0)

Note: The T area now (as of 49.2.0) uses fake items, similar to Logistics Pipes. You can set it to request up to 127 of an item, even non-stackable items: Right click to add items, and left click to subtract items; hold shift to add/remove 10 items at a time. If you click with either button on an empty slot, you will set that slot to a copy of the stack you’re holding.

Note: If the R grid and the retriever both contain an item in the same square, the retrievulator will not function. If neither contain an item, but the T grid does contain an item in that square, the retrievulator also will not function.

## Block Breaker

When you put a tool in, this will break the block in front of it.

It acts like a player breaking a block, so it takes time and uses durability.

## Liquid Duplicator, Liquid Disposer

Liquid versions of the duplicator and incinerator.

For the liquid duplicator, you should put a liquid container item in the slot – eg a filled bucket or IC2 cell.

## Online Player Detector

Turns green and emits a redstone signal when the player who placed it is online. Useful for servers which require you to turn off your machines when you’re offline.

## Storage Blocks


They work like the vanilla metal blocks.

There is also a charcoal storage block that looks identical to the coal one.

There is a config option to disable all of these at once, and another option to disable the vanilla storage blocks (coal, charcoal and redstone).

Nikolite and redstone blocks must be placed on top of another block or they will fall.

As of Minecraft 1.5, redstone blocks are now powered redstone blocks, made by crafting vanilla redstone blocks with sand.

As of Minecraft 1.6, coal blocks are now coal brick blocks, made by crafting vanilla coal blocks with stone bricks.

(Original description from [the Minecraft Forums](https://www.minecraftforum.net/forums/mapping-and-modding-java-edition/minecraft-mods/1281065-immibiss-mods-now-with-85-7-less-version-numbers))

## Archival notice

**This mod is abandoned and has been uploaded for archival purposes. It was originally created by [immibis](http://immibis.com/mcmoddl/). It has been uploaded to Modrinth under the ModrinthArchives account with permission from the original author.**


Bad Apple Shaders

# Bad Apple Shaders

  

This is an Iris/OptiFine shader which changes rendering to look like [【東方】Bad Apple!! ＰＶ【影絵】](https://youtu.be/FtutLA63Cp8)

 

## Screenshots


## FAQ

Q: Does this work on OptiFine?

A: Yes. **This does come with an epilepsy warning if you are on an m-series mac.**

Q: Does this work on Iris/Oculus?

A: Yes.

Q: Does this work on 1.8?

A: The Legacy version should work with 1.8.

## Pridepack

[Pridepack](https://pridecraft.gay/pridepack) is a Resource Pack made by [Pridecraft Studios](https://pridecraft.gay). It comes with many LGBT Pride additions, such as paintings, beds, mobs and Main Menu changes. If you’re interested in gaying your game, you should check it out!


Steak = Cooked Beef

Makes steak called cooked beef because it makes more sense and it will make a friend of mine happy because he likes beef!

It’s very simple, does nothing else, just this!

(And maybe a little easter egg, try to find it 😀 )

Squared Shadow

This is a Texture Pack, originally designed for “[Better Than Adventure!](https://www.betterthanadventure.net/)”, and consequentially Beta 1.7.3 (although it will work with ANY version of Minecraft that has a Shadow, since the location and filename has never changed, despite the outdated Resource Pack version warning), that gives the Entities a squared Shadow, instead of a circular one. Consistency, my beloved.


# CREDITS

– Shadow texture and “pack.png” made by AndreWharn.
– Do not use the assets without permission, please!

# Thanks for using this pack! 😀