Weezer Albums

Replaces some music discs with songs from each Weezer album. The resource pack is client-side only. All music belongs to Weezer. WARNING: SOME SONGS ARE 18+ | New ideas? Email me at [email protected].

Weed Eater

# Please read the “how do I install it” section! Otherwise the pack won’t work correctly.

A resource pack for use with shaders supporting PBR materials. Aims to replicate the 128x pack included with Minecraft RTX for Bedrock, as that pack is encrypted and therefore cannot be converted to Java format for use.

Several packs of this nature are already on the market. So why did I set out to make another, and why should you use it? Well, I have tried all those packs, and all of them lack consistency, correctness (specifically as outlined in [this guide](https://creativecloud.adobe.com/cc/learn/substance-3d-designer/web/the-pbr-guide-part-2)), or both. And I grew dissatisfied with having to give the least problematic option to people asking for recommendations. Since this is not a particularly difficult art style to replicate, I felt I could do better, and by taking advantage of batch generation techniques I was able to fully complete all blocks in well under a week.

Note: it’s been a couple years since I wrote the above. I am no longer sure of the state of other resource packs. Use whatever you like most!

## Which version do I download?

Use the LABpbr version for shaderpacks listed [here](https://wiki.shaderlabs.org/wiki/LabPBR_Supported_Packs), otherwise use the OLDpbr version. Both have the pack formats for 1.18, but they should work fine down to 1.13, just ignore the warning. For 1.13 you should resize (see next section) the Jappa textures from 1.14 instead of the old textures from 1.13, as they use the same format the resized pack will still load.

## How do I install it?
IMPORTANT PLEASE READ

The vanilla textures need to be upscaled to 128x for this to work. I haven’t included these, since they technically violate Mojang’s EULA. The other aforementioned packs do, so Mojang apparently doesn’t care about enforcement, but I want to err on the careful side. The recommended way to get these is to use [this script](https://drive.proton.me/urls/41WEA57PVC#Mmt98UKetnPS) which was kindly made for me by Bálint (you can find his work [here](https://github.com/BalintCsala/VanillaPuddingTart), if you want you can try this pack with his shaders by running it through his converter). Unzip the download, run the bat file for Windows or sh for macOS/Linux, use 8 for the upscaling factor, and paste the resulting zip in your resourcepacks folder. You can load this pack above or below mine, it doesn’t matter.

## Why is it called Weed Eater?

It’s parodying [this meme](https://www.youtube.com/watch?v=j4Ph02gzqmY). See also my pack description, “in the future, resource packs will be automatically generated!”

We Don’t Bite

![Project Banner](https://i.imgur.com/uhNL9cO.png)

![Dependencies](https://i.imgur.com/QDgzID6.png)

# We Don’t Bite

This resource pack changes the appearance of villagers into foxes, illagers into polar bears, using custom entity model mods!

### Fox villagers 🦊
* Become furry and smaller
* Make squeaky fox sounds
* Animated ears and tails
* Red, arctic, and fennec fox variants
* Profession clothings and levels
* Wandering trader fennec fox
* Zombie fox villagers

### Polar bear illagers 🐻‍❄️
* Become furry, white, and bigger
* Make scary roars
* Pillager, vindicator, evoker, ravager, witch, ravager, and illusioner

### Minor changes
* Raid omen effect appearance
* Totem of undying appearance

### Does not change 😢:
* Actual mob size (hitbox)

## Dependencies:

### One of custom entity model mods

#### Get one that can be used in your version

* [EMF](https://modrinth.com/mod/entity-model-features) ((Neo)Forge/Fabric 1.17.2 – **26.1+**)

* [OptiFine](https://optifine.net/downloads) (Forge/Vanilla 1.12.2 – 1.21.4+)

* [CEM](https://modrinth.com/mod/cem) (Forge/Fabric 1.18.2 – 1.20)

![Project Banner](https://i.imgur.com/lpO3Taz.png)

## Compatibilities:
* Most shaders
* Sounds from other resource packs
  

## Incompatibilities:
#### Villager/illager mods that doesn’t use vanilla villagers are not supported:
* NPC Variety mod
* some more
#### Does not utilize fox/bear textures from other resource packs

## Version Differences
### 1.12.2
– No biome foxes
– No polar bears for you too
### before 26.1
– No/weird sleeping animation
– No spawn egg textures
– Unchanged armor/items positions
– Bugs

## Addons
Get them from [my discord server](https://discord.gg/RaPrs543gx)
* Polar Bear Ominous Banner Resource Pack
* Guard Villager Mod (1.19.0, Forge 41.0.1)

## Download Links

**EMF**: https://modrinth.com/mod/entity-model-features

**OptiFine**: https://optifine.net/downloads

**CEM**: https://modrinth.com/mod/cem

Also available for Bedrock Edition: https://www.curseforge.com/minecraft-bedrock/addons/wedontbite-be

## Copyright
All assets made by Mojang belongs to Mojang.

All textures made by mod creators belongs to them.

Do not redistribute any other assets or modifications as part of a standalone pack.

![Nerd Fox Emote](https://i.imgur.com/zn7AZ0m.png)

WebStats

![logo](https://raw.githubusercontent.com/Dantevg/WebStats/master/img/banner-1024×256.png)

**View statistics from the scoreboard, PlaceholderAPI placeholders and other plugins in a web page!**

## Features
– **Multiple sources:** WebStats can combine statistics from these sources:
– **Scoreboard** objectives
– **Placeholders** (requires [PlaceholderAPI](https://www.spigotmc.org/resources/placeholderapi.6245/))
– **MySQL database:** with a customisable configuration, you can gather statistics from any plugin
– **Discord integration:** You can add WebStats as a webhook to your Discord server.
– **SkinsRestorer integration:** When present, WebStats will display player heads from SkinsRestorer (also for offline-mode and bedrock players).
– **Player head display:** The plugin uses the service provided by mc-heads.net to automatically display player heads next to the names.
– **Objective sorting:** Click on the column headers to sort on that objective. Clicking again reverses the sort.
– **Automatic data updates:** By default, WebStats refreshes the data every 10 seconds, though this is configurable and can also be disabled.
– **Online / AFK status:** When [EssentialsX](https://modrinth.com/plugin/essentialsx) is present, WebStats uses it to mark AFK players. Otherwise, you will still be able to see who is online.
– **Online player filter:** You can filter to only display online players for if you have many players.
– **Pagination:** For webpage performance, max 100 players are displayed by default with next/previous page controls.
– **Objective filtering:** In the config file, you can filter which scoreboard objectives should be visible on the webpage. By default, the filter only contains `’*’`, which means all objectives.
– **Custom column order:** By default, columns are displayed in alphabetical order. You can set your own order and select which columns should be shown.
– **Statistics export:** Save the statistics in a `.csv` file so you can make nice graphs.

## Installation
There are two ways to use WebStats: with your own server (more customisable) or with an integrated server (easier). The download contains the plugin jar plus a javascript file, you only need the javascript file for when you are using your own webserver.

For both methods, you need to open a port on the Minecraft server for the plugin to communicate over. Make sure to change the port number in config.yml (and in the web client initialisation when using your own server).

### Using integrated web server
Set `serve-webpage` in the config file to `true` and restart. That’s it.

### Using own web server
Copy the Javascript file from the zip file and import it as a Javascript module. You also need to initialise WebStats when the page loads, more detailed information and an example are present [on Github](https://github.com/Dantevg/WebStats/wiki/Getting-Started#set-up-webpage-front-end).

Please refer to the [Github wiki](https://github.com/Dantevg/WebStats/wiki/Config-file) for more information about the configuration file. It also has pages with more detailed information for some features.

## More info
I have made a simple demo page with dummy data for you to try out: [demo](https://dantevg.nl/mods-plugins/WebStats/demo/)

For more in-depth information, please see the [Github wiki](https://github.com/Dantevg/WebStats/wiki).

If you need help, or for bug reports, feedback and suggestions, please open an issue on https://github.com/Dantevg/WebStats/issues, or post in the [Spigotmc forum thread](https://www.spigotmc.org/threads/web-stats.492833/).

WebSenderReloaded

WebSender Reloaded, ready to help you!

Send a command to your Minecraft or Hytale server via DrawWEB or similar web scripts.

– Send command with PHP your Bungee, Velocity or Bukkit server!
– BungeeCord/Velocity and Spigot support!
– %100 Customizable config!
– Fast socket system!
– Multiple server support!
– /websender command. Perm: websender.admin
– Important: When you install the plugin, make sure to change the password, otherwise the plugin will not work. Also, if you change the websender port, enter a port that is not used elsewhere on your server.

**Important:** When you install the plugin, make sure to change the password, otherwise the plugin will not work. Also, if you change the websender port, enter a port that is not used elsewhere on your server.

**PHP EXAMPLE:**
If you downloaded version 1.0.1 or lower, the contents of the folder named “ExamplePHP” in the zip are incorrect, you can download version 1.0.2 or 1.2 to get the correct examples.

**Configuration for Plugin v1.5+ (Important)**
If you have installed version 1.5 or higher, you must configure your
“`
WebsenderAPI.php
“`
file according to your server’s Java version. Please follow the steps below.

**Step 1: Update the WebsenderAPI.php File**
1. Open the **.zip** archive you downloaded for the plugin.
1. Find the **WebsenderAPI.php** file located inside the ExamplePHP folder.
1. Replace the existing **WebsenderAPI.php** file on your website with this new one.

WebConsoleServer

# WebConsoleServer

A Minecraft plugin that exposes your server console through a WebSocket connection. Built for [groupez.dev](https://groupez.dev), a test server generator for paid plugins.

## Features

– Real-time console log streaming via WebSocket
– Password-protected authentication
– Log history persistence (loads previous logs on client connection)
– Support for both **Spigot/Paper** and **Velocity** platforms
– Included test web page for quick testing

## Supported Platforms

| Platform | Minecraft Version | Java Version |
|———-|——————-|————–|
| Spigot/Paper | 1.8.8+ | Java 8+ |
| Velocity | 3.3.0+ | Java 21+ |

## Test Web Page

A test web page is included in the `web/` folder. Open `web/index.html` in your browser to connect to the WebSocket server and view console logs in real-time.

## Installation

1. Download the appropriate JAR for your platform from [Modrinth](https://modrinth.com/project/webconsoleserver)
2. Place the JAR in your server’s `plugins` folder
3. Restart your server
4. Configure the plugin in `plugins/WebConsoleServer/config.properties` (Velocity) or `plugins/WebConsoleServer/config.yml` (Spigot)

## Configuration

“`properties
# IP address to bind the WebSocket server (use 0.0.0.0 for all interfaces)
websocket-host=0.0.0.0

# Port for the WebSocket server
websocket-port=8765

# Password for WebSocket authentication (leave empty for no authentication)
websocket-password=changeme

# Maximum number of log lines to keep in history
max-log-history=500
“`

## WebSocket Protocol

### Authentication Flow

1. Client connects to `ws://host:port`
2. Server sends `{“type”:”auth_required”}`
3. Client sends `{“type”:”auth”,”password”:”your_password”}`
4. Server responds with `{“type”:”auth_success”}` or `{“type”:”auth_failed”}`
5. On success, server sends log history followed by `{“type”:”history_complete”}`

### Message Types

| Type | Direction | Description |
|——|———–|————-|
| `auth_required` | Server → Client | Authentication is required |
| `auth` | Client → Server | Authentication request with password |
| `auth_success` | Server → Client | Authentication successful |
| `auth_failed` | Server → Client | Authentication failed |
| `log` | Server → Client | Console log message |
| `history_complete` | Server → Client | All historical logs have been sent |

### Log Message Format

“`json
{“type”:”log”,”message”:”[12:34:56] [INFO] [ServerName]: Your log message here”}
“`

## Building from Source

“`bash
# Build all modules
./gradlew build

# Output JARs are located in target/
# – WebConsoleServer-Spigot-1.0.jar
# – WebConsoleServer-Velocity-1.0.jar
“`

On Windows, use `gradlew.bat` instead of `./gradlew`.

## License

MIT License

## Links

– [groupez.dev](https://groupez.dev) – Test server generator for paid plugins
– [Github](https://github.com/GroupeZ-dev/WebConsoleServer) – Source code

WEATHER 2 REMASTERED RP ENCHANCED

### WHO ARE YOU?

I am XFATEX the person that made the 3D protomanlys weather mod blocks (I will link it down in the descritpion) and I was wondering that weather 2 remastered has alot of blocks and you can change the cloud texture so I gave it a try and it seems that it works perfectly well and the clouds look amazing in the game and the rain looks good but I will change it soon dont worry.

**https://modrinth.com/resourcepack/pmweather-resource-pack**

HERE IS THE CONFIG TO MAKE THE CLOUDS AS THE SAM AS MINE

**https://www.mediafire.com/folder/ngqqkrnyjo2l0/weather2R_config**

Wearable Backpacks: RLCraft Edition

NOTICE: This is a fork of “[copygirl’s Wearable Backpacks](https://www.curseforge.com/minecraft/mc-mods/wearable-backpacks)”, for the original mod please go to their page, all credits go to them and their contributors.
This fork was made for RLCraft to give bauble support to backpacks and fix other issues, while it will work outside of RLCraft it will likely have issues with other mods that have specific compatibility for the original Wearable Backpacks, and you should use the original if you do not need the bauble support.

Wearable Backpacks adds simple backpacks that, rather than just opening in your inventory, have to be worn to move them and have to be placed to open them. Additionally, just like the original mod, you can dye backpacks if you want, and while wearing a backpack, other people can open your worn backpack by clicking on it from behind you. Additionally when you die, instead of the items in the backpack falling everywhere, the backpack will be placed on the ground as a block, still holding its items.

This fork deviates from the original in the following ways:
– Bauble support is added to the backpacks, allowing you to wear the backpack in the “Body” bauble slot, instead of as chest armor or in a hidden slot. This allows you to wear a backpack while still wearing a full set of armor, while requiring a tradeoff of a bauble slot for using the backpack.

– Backpacks will no longer place themselves down in water when you shift right-click the water, allowing for compatibility with mods such as SimpleDifficulty.

– Added compatibility for Lycanite’s Mobs boss arena protection, to fix backpacks being voided when placed in a protected area. (Off by default)

**Need to get in contact with me, or want to support me? Click the badges below:**

[![Discord](https://img.shields.io/discord/1202561752294760478?labelColor=violet&color=purple)](https://discord.gg/ZPdwrtvBKm)
[![Patreon](https://img.shields.io/badge/Patreon-F96854?style=for-the-badge&logo=patreon&logoColor=white)](https://www.patreon.com/FermiumModding)
[![Ko-Fi](https://img.shields.io/badge/Ko–fi-F16061?style=for-the-badge&logo=ko-fi&logoColor=white)](https://ko-fi.com/fonnymunkey)

**Need a server? Click the banner below and use code “fonny” for 25% off your first month with Bisect Hosting:**
[![Bisect Banner](https://raw.githubusercontent.com/fonnymunkey/fonnymunkey.github.io/main/docs/assets/banner.webp)](https://fonnymunkey.github.io/)

WeaponsPlus

This mod adds 4 new swords to the game.

– Nether Star Sword
– Beacon Sword
– Blaze Sword
– Slime Sword

– The nether star sword is slightly faster than a normal sword and is pre-enchanted with a few level 5 enchantments.
– The beacon sword, while not having much durability, grants regeneration 2 when held.
– The blaze sword is pre-enchanted with fire aspect 2.
– The slime sword is pre-enchanted with knockback 4

We recommend [Just Enough Items](https://modrinth.com/mod/jei) to view the recipies

Feel free to add this mod to your modrinth modpack

YDM’s Weapon Master

### Forge [​1.7.10 / 1.8.9 / 1.9.4 / 1.10.2 / 1.11.2 / 1.12.2 / 1.13.2 / 1.14.4 / 1.15.2 / 1.16.2-5 / 1.17.1 / 1.18.2 / 1.19.x / 1.20.x / 1.21.x / 26.1.x]
### NeoForge [1.21.7 / 1.21.8 / 1.21.11 / 26.1.x]
### Fabric [1.20.1 -> 1.21.11 / 26.1.x]

With this Mod your Hotbar items will be visible on your Character, with a unique location for a Shield and Banner.

You can turn on or off the visibility for all of them one-by-one in the settings window (Press V to open it).
Good compatibility with other mod Items.
(With these types of Items: TieredItem (Sword), TridentItem, ShieldItem, BowItem, CrossbowItem, BannerItem, DiggerItem (Tools))

### **There are 3 versions available for this mod!**

1. A **Client-Only** where others won’t see these items on you, but you can use it on servers without any problems.

2. There is a **Multiplayer** version where others see you the same way you see yourself!

So if you hide some of your items with the toggle screen (can be opened with the V key by default)
other players won’t see those items on you.

**3. From v4.1.0+ the first 2 version in merged**

If you find any errors please let me know.

Only the latest minecraft version gets support!

Thanks for downloading my mod!

### IMPORTANT:
The Client-Only and Multiplayer version is merged from v4.1.0+

### Credits:

[-russian translations: rey_zex](https://www.curseforge.com/members/rey_zex/projects)